---------------------------------------------- Release notes for Repute 1.0 Service Release 8 ---------------------------------------------- Release date: 25/05/2004 This file records the changes made to Repute 1.0 from Service Release 7 ©2002-4 Geocentrix Ltd. All rights reserved. "Geocentrix" is a registered trademark and "Repute" a trademark of Geocentrix Ltd. Release: -------- Repute 1.0 SR 8 (Build 1.0.8.405). Issues fixed in this release ---------------------------- 928. Limiting stresses wrongly displayed in HTML Reports 927. Identification state of elements: Pile type No. reported as *** in output text file 926. Project information is not passed through PGroupN 925. Stiffness/flexibility coefficients should not be printed for non-linear analyses 922. Save Project As box displays name of last project saved as its default 920. PGroupN has performed an illegal operation and will be shut down 919. Add warning message when a pile is raked towards another pile 918. Plots are sent to default printer even when another printer is selected 915. Cannot save project when calculation engine has insufficient capacity to analyze the project (degrees of freedom available < degree of freedom needed) 913. PGroupN failed to run (executable not loaded) 911. Include a footnote at the bottom of each printed page showing the filename 909. Key results report displays garbage text before its main title 907. The electronic licence for this program is missing 883. Key results report, detailed reports, and graphs are missing the Project heading Known issues ------------ 899 - Adhesion factor box is cut off the bottom of the Layers page when screen resolution is 800 x 600 Workaround: Change the screen resolution to finer than 800 x 600 834 - Time taken to read projects containing large number of piles is very long 758 - Very small numbers are omitted when HTML report format selected (workaround: change the Report Format to XML, via Tools > Program Options > General) 747 - Hyperbolic factors trigger error message when outside typical range (not just outside possible range) 732 - Cannot use delete key to edit numbers on Piles page 712 - Edit box will not accept a decimal point when overwriting text containg a decimal point 709 - Error 1931 during installation 706 - No warning is given that additional parameters are required when switching from linear to non-linear analysis 705 - Units for angles do not appear in drop-down boxes 703 - Scales of X and Y axes of pile layout graph are different 690 - X and Y boxes won't accept a negative start to a new number 689 - Delete key does not work on Project page 687 - PGroupN is taking a long time to run Program files in this release: ------------------------------ File marked * have changed or are new in this release ENGINEERING.DLL (Build 3.0.3.16) GEOCENTRIX.DLL (Build 3.0.5.19) GEOCENTRIXREGISTRY.DLL (Build 3.0.4.16) GEOCENTRIXUI.DLL (Build 3.0.4.402) GXWIDGETS.DLL (Build 3.0.1.34) MATERIALS.DLL (Build 3.0.3.16) *PGROUPN.DLL (Build 1.0.8.405) *PGROUPN.EXE (Build 1.6.7.405) *PGROUPNEX.EXE (Build 1.6.7.405) PLATFORM.DLL (Build 3.0.3.16) PROJECT.DLL (Build 3.0.3.16) *README.TXT (dated 25/05/04) *REPUTE1.EXE (Build 1.0.8.405) REPUTE1.EXE.MANIFEST (dated 03/12/02) REPUTE1.LIC (dated 22/04/03) *REPUTE.DLL (Build 1.0.8.405) SOILS.DLL (Build 3.0.3.16) WATERTABLES.DLL (Build 3.0.3.16) BCBIE50.BPL BORLNDMM.DLL (version 5.0.12.34) CC3250MT.DLL (version 5.0.1.80) CW3230.DLL (version 4.2.0.0) DXSBC5.BPL (version 4.2.0.0) GRAPHS32.OCX (version 6.0.0.0) GSPROP32.DLL (version 6.0.0.0) GSW32.EXE (version 6.0.0.0) GSWAG32.DLL (version 6.0.0.0) GSWDLL32.DLL (version 6.0.0.0) LFBMP13N.DLL (version 13.0.0.15) LFCLP13N.DLL (version 13.0.0.15) LFCMP13N.DLL (version 13.0.0.15) LFEPS13N.DLL (version 13.0.0.15) LFFAX13N.DLL (version 13.0.0.15) LFFPX13N.DLL (version 13.0.0.15) LFGIF13N.DLL (version 13.0.0.15) LFJ2K13N.DLL (version 13.0.0.15) LFKODAK.DLL (version 1.1.0.2) LFPCD13N.DLL (version 13.0.0.15) LFPCX13N.DLL (version 13.0.0.15) LFPNG13N.DLL (version 13.0.0.15) LFPNM13N.DLL (version 13.0.0.15) LFPSD13N.DLL (version 13.0.0.15) LFTGA13N.DLL (version 13.0.0.15) LFTIF13N.DLL (version 13.0.0.15) LFXBM13N.DLL (version 13.0.0.15) LFXPM13N.DLL (version 13.0.0.15) LTCLR13N.DLL LTDIS13N.DLL (version 13.0.0.15) LTEFX13N.DLL (version 13.0.0.15) LTFIL13N.DLL (version 13.0.0.15) LTKRN13N.DLL (version 13.0.0.12) LVKRN13N.DLL (version 13.0.0.12) PCDLIB32.DLL (version 3.0.0.0) VCL50.BPL (version 5.0.6.18) VCLX50.BPL (version 5.0.6.18) X257PR51.BPL (version 2.5.7.0) GENERATED\ (empty) HELP\ *REPUTE.CHM (dated 25/05/2004) MANUALS\ *CHANGES.TXT (dated 25/05/2004) REPUTE 1.0 REFERENCE MANUAL.PDF (dated 03/12/2002) *REPUTE 1.0 USER MANUAL.PDF (dated 25/05/2004) PROJECTS\ BENCHMARKS\ *BASILE-LINEAR(2003).RPX (25/07/2003) *BASILE-NON-LINEAR(2003).RPX (25/07/2003) *BRIAUD(1989).RPX (25/07/2003) *DAVISSON-SALLEY(1970).RPX (17/09/2003) *HAUNG(2001).RPX (25/07/2003) *ONEILL(2001).RPX (25/07/2003) *PIGLET EXAMPLE 2(1 IN 4 RAKE, 2M SPACING).RPX (17/09/2003) *PIGLET EXAMPLE 2(1 IN 4 RAKE, 3M SPACING).RPX (17/09/2003) *PIGLET EXAMPLE 2(1 IN 6 RAKE, 2M SPACING).RPX (17/09/2003) *PIGLET EXAMPLE 2(1 IN 6 RAKE, 3M SPACING).RPX (17/09/2003) *PIGLET EXAMPLE 2(1 IN 8 RAKE, 2M SPACING).RPX (17/09/2003) *PIGLET EXAMPLE 2(1 IN 8 RAKE, 3M SPACING).RPX (17/09/2003) *PIGLET EXAMPLE 2(NO RAKE, 2M SPACING).RPX (17/09/2003) *PIGLET EXAMPLE 2(NO RAKE, 3M SPACING).RPX (17/09/2003) *POULOS-DAVIS(1980).RPX (25/07/2003) *TOMLINSON(1994).RPX (03/04/2003) EXAMPLES\ 2D-LINEAR.PGN (dated 27/04/2002) 2D-NON-LINEAR.PGN (dated 27/04/2002) 3D-LINEAR.PGN (dated 27/04/2002) 3D-NON-LINEAR.PGN (dated 27/04/2002) 2D-LINEAR.PGN (dated 27/04/2002) PGROUPN\ SAMPLE1.PGN (dated 09/09/2002) SAMPLE2.PGN (dated 26/07/2002) TUTORIAL 1\ *STEP1.RPX *STEP2.RPX *STEP3.RPX *STEP4.RPX *STEP6.RPX (all dated 24/05/2004) TUTORIAL 2\ *STEP1.RPX *STEP2.RPX *STEP3.RPX *STEP4.RPX *STEP6.RPX *STEP8.RPX (all dated 24/05/2004) TUTORIAL 3\ *STEP1.RPX *STEP2.RPX *STEP3.RPX *STEP4.RPX *TUTORIAL1.RPX (all dated 24/05/2005) RELEASE NOTES\ REPUTE091.TXT (dated 12/09/2002) REPUTE092.TXT (dated 02/10/2002) REPUTE093.TXT (dated 17/10/2002) REPUTE094.TXT (dated 19/10/2002) REPUTE095.TXT (dated 15/11/2002) REPUTE100.TXT (dated 03/12/2002) REPUTE101.TXT (dated 06/01/2003) REPUTE102.TXT (dated 21/03/2003) REPUTE103.TXT (dated 22/04/2003) REPUTE104.TXT (dated 01/06/2003) REPUTE105.TXT (dated 26/08/2003) REPUTE106.TXT (dated 14/10/2003) REPUTE107.TXT (dated 20/02/2004) *REPUTE108.TXT (dated 25/05/2004) REPORTS\ GEOCENTRIX-LOGO.GIF (dated 23/08/2001) REPUTE.CSS (dated 11/10/2002) REPUTE-COMMON.XML (dated 24/09/2002) *REPUTE-COMMON.XSLT (dated 21/05/2004) REPUTE-LOGO.GIF (dated 27/08/2002) REPUTE-SIGN-CONVENTION.GIF (dated 10/10/2002) REPUTE-WELCOME.HTML (dated 15/10/2002) DETAILED\ *ALL-OUTPUT.XSLT (dated 24/05/2004) *PILE GROUP FLEXIBILITIES.XSLT (dated 24/05/2004) *PILE GROUP STIFFNESSES.XSLT (dated 24/05/2004) *PILE LOADS.XSLT (dated 24/05/2004) *PILE STRESSES.XSLT (dated 24/05/2004) SUMMARY\ ALL-INPUT.XSLT (dated 20/11/2002) COMMON-INPUT.XSLT (dated 17/04/2003) *KEY RESULTS.XSLT (dated 21/05/2004) LAYER-INPUT.XSLT (dated 06/02/2004) LOAD-INPUT.XSLT (dated 06/02/2004) OPTION-INPUT.XSLT (dated 17/02/2004) PILE-INPUT.XSLT (dated 06/02/2004) PROJECT-INPUT.XSLT (dated 06/02/2004) -------------------- End of release notes --------------------